Overview of summer tires, disk wheels - GF40.10-P-1002MUC

MODEL 220.175 with CODE (979) Special protection version with CODE (491) USA version 

The recommended wheel/tire combinations apply only when the dimensions are entered in the vehicle documentation at the factory or when a corresponding part certification is present. For tire/wheel combinations not entered in the vehicle documentation/title, a corresponding part certificate or approval certificate is to be given to the customer.

All the wheel/tire combinations listed here may only be fitted without further reason when they are listed in the registration papers under items 20 to 23 and 33 or the Technical Inspection Association experts' reports are ready.

The size designation for the rims applies only for the vehicle series specified. Deviations in the contour of the wheel or the brake system can lead to hitting on adjacent components on other models in spite of the same nominal dimensions and therefore affecting the operating safety.

In the Federal Republic of Germany, a modification approval is required from an officially recognized expert or tester from a technical testing point for motor vehicles or by a testing engineer by an officially recognized supervisory organization is required for wheel/tire combinations which require conversion work on the body and/or chassis.

All disk wheels are permissible only as light alloy version unless special reference is made.

The recommended tire makes are listed in alphabetical order. No suggestion of priority is intended.

Tire on rim	Recommended tire makes	Notes / Certificates
225/55 R 17 101H XL on 7.5 J x 17 H2 ET46	1 DUNLOP DST	1 -
235-700 R 450A C AX 114 H on 235x450 PA ET 54		Tires must be replaced after: 6 years related to the DOT marking After 10.000 km, at the latest after 3 years related to the DOT marking for 220.875/876/878 (Pullman) At a tire tread below 3 mm
	1 MICHELIN AX	1 -