Check oil level - AR18.00-P-3035-01DA
| Number | Designation | Engine 113.991 in model 215, 220 | ||
|---|---|---|---|---|
| BF18.00-P-1001-03DA | Oil level | Maximum | mm | 110 |
| Minimum | mm | 95 | ||
| BF18.00-P-1002-03DA | Oil dipstick indication from 83 mm to 107 mm (oil level too low) | 83 mm | Replenished oil quantity in liters | +2.4 |
| 85 mm | Replenished oil quantity in liters | +2.2 | ||
| 87 mm | Replenished oil quantity in liters | +2.1 | ||
| 89 mm | Replenished oil quantity in liters | +1.9 | ||
| 91 mm | Replenished oil quantity in liters | +1.8 | ||
| 93 mm | Replenished oil quantity in liters | +1.6 | ||
| 95 mm | Replenished oil quantity in liters | +1.5 | ||
| 97 mm | Replenished oil quantity in liters | +1.3 | ||
| 99 mm | Replenished oil quantity in liters | +1.1 | ||
| 101 mm | Replenished oil quantity in liters | +0.9 | ||
| 103 mm | Replenished oil quantity in liters | +0.7 | ||
| 105 mm | Replenished oil quantity in liters | +0.5 | ||
| 107 mm | Replenished oil quantity in liters | +0.3 | ||
| BF18.00-P-1003-03DA | Oil dipstick indication from 109 mm to 111 mm (oil level correct) | 109 mm | Oil quantity in liters | 0.0 |
| 110 mm | Oil quantity in liters | 0.0 | ||
| 111 mm | Oil quantity in liters | 0.0 | ||
| BF18.00-P-1004-03DA | Oil dipstick indication from 113 mm to 121 mm (oil level too high) | 113 mm | Extracted oil quantity in liters | -0.3 |
| 115 mm | Extracted oil quantity in liters | -0.5 | ||
| 117 mm | Extracted oil quantity in liters | -0.7 | ||
| 119 mm | Extracted oil quantity in liters | -0.9 | ||
| 121 mm | Extracted oil quantity in liters | -1.1 | ||
- Position vehicle with warm engine on an even surface.
- Switch off engine and maintain a waiting time of approx. 5 minutes.
- Unplug plug (1) of oil dipstick guide tube (2).
Lead the dipstick (3) into the oil dipstick guide tube (2) until its tip is in the engine oil pan.
Leave there for at least a 3 seconds dwell time.
The collar of the dipstick grip end does not sit on the oil dipstick guide tube (2).
Do not bend the
dipstick (3). The
dipstick (3) must be pushed and guided according to the form of the oil dipstick guide tube (2).
Shown on model 203 with engine 112
- Read off engine oil level on dipstick
(3).
- Establish the oil replenishment quantity from the oil level table.
- Adjust engine oil level correctly, if required.
- Place plug (1) onto oil dipstick guide tube (2).