Remove/install hinge strap of front door handle - AR72.10-P-4012MB

MODEL 220.175 /178 with CODE (Z07) Top protection 

Fig 1: Identifying Hinge Strap Of Front Door Handle Remove/Install Components

	Remove/install
1	Remove door liner from front door		AR72.10-P-1000MB
2	Remove door inner panel		AR72.10-P-0104MB
3	Remove armor plate from front door handle		AR72.10-P-2400-01MB
			*BA72.10-P-1002-01EA
4	Remove armor plates from front door lock		AR72.10-P-4011-01MB
			*BA72.10-P-1003-01EA
5	Remove window guide rail		AR72.10-P-1500MB
6	Remove exterior door handle on front door		AR72.10-P-2400MB
7	Remove front door lock		AR72.10-P-4011MB
8	Unscrew screw (1), move hinge strap (3) in direction of door lock and remove through door opening	Installation:  Check plastic socket (2) for damage, replace if necessary. Insert hinge strap (3) only, do not yet position and tighten screw (1), so that door lock can be installed in the release rod
9	Install in the reverse order

FRONT DOOR TIGHTENING TORQUE

Number	Designation			Model 220 with code Z07
BA72.10-P-1002-01EA	Screw for armor plate on window door handle		Nm	28
BA72.10-P-1003-01EA	Bolt for outer door lock armor plate to front door	M6	Nm	7
		M8	Nm	28