Adjusting crank window in front door - AR72.10-P-1950M

MODEL 220 

Fig 1: Identifying Crank Window Adjusting Components In Front Door - Model 220

	Checking
1	Check installed position of crank window on window frame	When the crank window is adjusted correctly, the edge of the glass runs parallel to the contour of the front wall pillar and roof panelling, illustration on left. The crank window should not be completely closed.
2	Check installed position on vertical window guide rail	Illustration on left, the crank window (1) should fit in the window guide rail completely
	Removing, installing
3	Remove door lining on front door		AR72.10-P-1000M
4	Pull off sound deadening mat
	Adjusting
5	Loosen bolts (2), correct crank window (1) upwards or downwards, at the same time press backwards into the vertical window guide rail and tighten bolts (2)
6	Check crank window for ease of movement
7	Install in reverse order