Remove, install front door damper - AR72.10-P-2200MC

MODELS 220.175 /178 with CODE (Z04) Light armoring 

Fig 1: Identifying Front Door Damper Remove/Install Components - Light Armoring

	Removing, installing
1	Remove door liner from front door		AR72.10-P-1000MC
2	Remove speaker (1)
3	Remove retainer (4) and remove bolt (3) with washer (5)	At A-pillar and door armor plate.
4	Remove door damper	Installation:  The noticeable unevenness on the damper housing (arrow) must point upward. Check gasket on door panel, replace if necessary.
5	Install in the reverse order