Carrying out distance and comparison measurements on front axle - AR40.30-P-0402-01I
| Number | Designation | Model 215 | Model 220 except 220.083/084/087/183/184/187 | ||
|---|---|---|---|---|---|
| BE40.30-P-1001-06B | Dim. | V1 | mm | 4 | 4 |
| V2 | mm | 4 | 4 | ||
| V3 | mm | 3 | 3 | ||
| V4 | mm | - | - | ||
| V5 | mm | 860±3 | 860±3 | ||
| V6 | mm | 3 | 3 | ||
| V7 | mm | - | - | ||
| V8 | mm | 765±3 | 765±3 | ||
| V9 | mm | 819±3 | 819±3 | ||
| V10 | mm | - | - | ||
| Fig. see | AR40.30-P-0402-01I | AR40.30-P-0402-01I | |||
The measurement points are shown on model 220 with AIRmatic
- Comparison measurement "V1
" measured from the check bore "K
" to the molded surface at the torque strut (1) from left to right.
Use telescopic measuring rod (06) 124 589 02 19 00 with measuring tip
- Comparison measurement "V2
" measured from left to right from the check bore "K
" to the body side member.
- Comparison measurement "V3
" measured from left to right from the check bore "K
" to the center of the retaining bolt for the spring link on the front axle carrier.
- Comparison measurement "V5
" between the left and right front transverse control arm mounting, measured across the center of the mounting screw.
Only carry out the measurement if the camber can no longer be adjusted.
- Comparison measurement "V6
" measured from left to right from the check bore "K
" to the center of the retaining bolt for the torque strut on the front axle carrier.
- Distance "V8
" between the left and right spring strut bearings on the front axle carrier, measured across the centers of the retaining bolts.
- Distance "V9
" between the left and right torque strut bearings on the front axle carrier, measured across the centers of the retaining bolts.