Electric engine/air conditioning fan function - GF83.40-P-2118-01I

Function 

The power of the electric engine/air conditioning fan is controlled by the engine electronics (infinitely variable).

The automatic air conditioning pushbutton control module calculates the fan speed setting depending on the refrigerant pressure and transmits the request to the engine electronics via the electronic ignition lock control module.

In air conditioning mode with an outside temperature of 15 °C and ground speed of below 70 km/h, a basic ventilation capacity of 40 % is requested.

The engine electronics calculate the fan speed setting depending on the engine temperature and compare this with the request from the air conditioning. The greater of the two is output as the control signal.