Apply glue - AR67.10-P-1000-08N

Illustrated on rear window 

1. Apply glue bead in sequence of numbering in order to avoid contact with glue.
   Fig 1: Identifying Glue Bead In Sequence Of Numbering

   

   Move nozzle along the adhesive surface or the glue residues on the body flange Height of glue bead approx. 13 mm.

   Install window within 5 minutes before adhesion of the glue starts to decrease.

   Fig 2: Identifying Nozzle Adhesive Surface Or Glue Residues On Body Flange Height