Retrofit hinge and drive for trunk lid remote control - AN88.50-P-0002-03N

Model 215, 220 

1. Install left hinge lever (5) and fasten with screws (6).
2. Repair bolts (6) with paint in visible area.
   Fig 1: Identifying Left Hinge Lever And Screws

   

1. 3.1 Model 215 
   • Move in drive element from bottom
2. 3.2 Model 220 
   • Move in drive element through taillamp opening
3. 4 Insert right hinge lever (7) in drive element with splines and fasten with nuts (8).
4. 5 Repair nuts (8) with paint in visible area
   Fig 2: Identifying Right Hinge Lever And Nuts

   
5. 6 Screw on drive element (9) at bottom to mounting plate (10) from rear.
   Fig 3: Locating Screw On Drive Element