Remove/install bottom engine compartment paneling - AR61.20-P-1105M

MODEL 215.373 /374 /375 /376 /378 /379, 220.063 /065 /067 /070 /073 /074 /075 /083 /084 /087 /163 /165 /167 /170 /173 /174 /175 /176 /178 /179 /183 /184 /187 /875 /878 

Rear engine compartment paneling 

Fig 1: Identifying Rear Engine Compartment Paneling Bolt - Model 215, 220

Center engine compartment paneling 

Fig 2: Identifying Center Engine Compartment Paneling Bolt - Model 215, 220

Front engine compartment paneling 

Fig 3: Identifying Right And Left Front Engine Compartment Paneling - Model 215, 220

	Remove
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
1	Raise vehicle with lifting platform
2	Remove bottom engine compartment paneling	Removal sequence for engine compartment paneling: Rear engine compartment paneling Middle engine compartment paneling Right front engine compartment paneling (A) Left front engine compartment paneling (B)
	Install
3	Install bottom engine compartment paneling	Install left and right front engine compartment paneling so that the rubber lips on the bumper are covered.