Terminating/ending call, function - GF82.70-P-2001B
MODELS 140, 202, 203 up to 23.4.04, 208.3, 210,215, 220 up to 31.8.03 with CODE (813) Voice control system (VCS)
Shown on models 202, 203, 208.3, 210, 215, 220 as of 6/1/00
Illustrated on model 220 up to 31.5.00
Abort
If the VCS switch (S93/2) is actuated during a phone call, then the voice recognition of the voice control system (VCS) is deactivated and the existing connection is terminated.
The voice recognition system is located:
- In the voice control module (A35/10a1) of the telephone transmitter/receiver/voice control system (A35/10) (model 140, 210 up to 5/31/98).
- in the voice control system control unit (A35/11) (models 202, 203, 208, 210 as of 1.6.98, 215, 220).
This is possible at any point during the call. If the user is in the entry mode, they can exit the voice recognition and deactivate the system via the voice command "End" via the hands-free system microphone (B25). This is also possible at any point in the input mode.
Ending call
On models 140, 202, 203, 208.3, 210, 215 and 220 without multifunction steering wheel (MFL), the VCS switch (S93/2) has to be activated (pushed away from the driver) after ending a phone call in order to terminate the connection.
On models 203, 208.3, 210, 215 and 220 with multifunction steering wheel (MFL), the connection is terminated via the accept/terminate phone call button (S111s3) and not by operating the VCS switch (S93/2).
If the driver does not end the telephone call, the VCS does not consider the call as terminated. As a result, the VCS cannot recognize an incoming call.
| Dialing, function | Selection and dialog with telephone system | GF82.70-P-3000B | |
| Models 202.08 /09 /18 as of 1.6.00 Model 203 Models 208.3, 210 as of 1.6.00 Models 215, 220 as of 1.6.00 up to 31.8.03 Selection and dialog with audio components (radio, CD, cassette) |
GF82.70-P-3000C | ||
| Voice control system switch, location/task | GF82.70-P-4100B | ||
| Location / purpose of voice control unit | Model 140 Model 210 up to 31.5.98 |
GF82.70-P-4101B | |
| Hands-free microphone, location/task | Models 140, 202, 208, 210 with code (274) MB D-net telephone Models 140, 202, 210 with code (312) D-network portable CTEL telephone with CODE (313) D-network portable CTEL with code (314a) "Standard" D-network telephone Model 202, 208, 210, 215, 220 with code (316) MB D-network telephone (D2B) with code (317) D-network portable CTEL telephone (D2B) Model 203 with CODE (450) taxi version Models 203, 208, 210, 215, 220 with code (853) MB standard telephone Models 202, 203, 208, 210, 215, 220 with code (854) MB portable CTEL telephone |
GF82.70-P-4102B | |
| Hands-free system loudspeaker, location/task | Models 140, 202, 208, 210 with code (274) MB D-net telephone Models 140, 202, 210 with code (312) D-network portable CTEL telephone with code (313) D-network portable "CTEL telephone" with code (314a) "Standard" D-network telephone Model 202, 208, 210, 215, 220 with code (316) MB D-network telephone (D2B) with code (317) D-network portable CTEL telephone (D2B) Models 203, 208, 210, 215, 220 with code (853) MB standard telephone Models 202, 203, 208, 210, 215, 220 with code (854) MB portable CTEL telephone |
GF82.70-P-4103B | |
| CTEL transmitter/receiver, location / task | Model 140 Model 210 up to 31.5.98 |
GF82.70-P-4104B | |
| Voice control system control unit, location/task | Models 202, 203, 208.3 Model 210 as of 1.6.98 Models 215, 220 up to 31.8.03 |
GF82.70-P-4113A |