LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2001 >> S500 >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Electrical System -- Basic Knowledge -- 215 & 220 Chassis - 2 Of 2 >> Basic Knowledge >> Emergency call actuation, function - GF82.95-P-2003 >> Emergency call actuation, function - GF82.95-P-2003P

Emergency call actuation, function - GF82.95-P-2003P

MODELS 203, 210, 220 up to 31.8.03 with CODE (855) TELE AID with CODE (930) Taxi emergency call for a TELE AID emergency call 

MODELS 208.3, 215 up to 31.8.03 with CODE (855) TELE AID for a TELE AID emergency call 

A TELE AID emergency call can be triggered automatically or manually:

Manually: 

For diagnostic purposes, manually with Star Diagnosis.

Automatically: 

A TELE AID emergency call is completed when the service center terminates the voice connection.

Emergency call priority 

The information how an emergency call is triggered is entered into the emergency call telegram generated by the D2B telephone and TELE AID transmitter/receiver (A35/17). The types of actuation have various priorities.

Highest priority:

  1. Automatic emergency call
  2. Manual taxi emergency call with (S62/6 (only with code 930, taxi emergency call)
  3. Manual emergency call with SOS push-button (S93/3)
  4. Telediagnosis call with corresponding button on telephone handset (A34)

    Lowest priority

  5. MB Info via relevant menu on telephone handset (A34) (see owner's manual)

If an emergency call is already active when an emergency is actuated this active call is terminated. The emergency call with the lower priority is not started.

If an emergency call with lower priority is already active when triggering, this call is interrupted and the emergency call with the higher priority is started.

Peculiarities on taxi emergency call (only with code 930) 

A taxi emergency call should not be noticed by the person(s) posing the threat. For this purpose the emergency alarm actuation button (S62/6) is concealed in the driver's footwell. An indicator lamp, which confirms that the emergency alarm system activate button (S62/6) has been pressed, may be installed as an option. It illuminates for 2 minutes after a taxi emergency call is triggered. The indicator lamp is installed so that only the driver can recognize when it flashes. Moreover, it is ensured that in the event of a taxi emergency call:

The police monitors the passenger compartment via the hands-free system on a taxi emergency call and decides if a voice connection should be completed.

The taxi emergency call can be terminated:

IMPORTANT A TELE AID emergency call or taxi emergency call can only be triggered in emergencies. The telephone system cannot be used during an emergency call.

  Emergency alarm system actuation button, location/task/design/function Model 203 GF82.25-P-4100P
    Model 210, 220 GF82.25-P-4100PA
  Emergency call telegram generation, function   GF82.95-P-2004P 
  Emergency call telegram transmission, function   GF82.95-P-2005P 
  Voice connection to vehicle, function   GF82.95-P-2006P 
  Status indicator, location/function   GF82.95-P-2002P 
  Restraint system control unit data, function   GF82.95-P-3005P 
  Transmitter/receiver unit, location/task/design/function for telephone and TELE AID GF82.95-P-4300A 
  TELE AID push-button, location/task/design/function for TELE AID emergency call GF82.95-P-4101A 
  Rollover sensor, location/task   GF82.95-P-4206P