Switching off anti-towing sensor (TS), function - GF80.50-P-3024S

MODEL 215, 220 with CODE (491) USA version 

MODEL 215, 220 with CODE (551a) Anti-theft alarm (ATA) 

Function prerequisites 

The anti-towing sensor (TS) can only be switched off when

• the anti-theft alarm (ATA) is activated previously  and
• circuit 15 is OFF.

Function 

Actuate the TS, IMS and ATA function indicator switch (N72/1s7) to switch off the TS  . After releasing the switch the TS is switched off.

This is indicated by the LED in the switch coming on continuously  for two seconds.

The next time the ATA is activated  the TS remains off.

• The TS can only be switched off for one ATA activation period. Before the ATA is activated again switch-off must be repeated if desired.
• Further actuation of the switch for switching off the interior motion sensor (IMS)  is only effective following the confirmation signal by the LED.