Emergency light actuation function - GF82.10-P-3013A

MODELS 215.###, 220.02# /06# /07# /12# /16# /17# 1# 

The emergency light actuation  function is intended to prevent the complete breakdown of the exterior light system occurring through a single error, e.g. through a faulty processor.

Emergency light actuation in event of databus or left front SAM control module (N10/6) malfunction 

When the ignition is switched on (terminal 15) the right front SAM control module (N10/7) actuates the

• standing and parking lamp (E2e3) in the right-hand lamp unit,

  and

• and low beam lamp (E1e2) in the left-hand lamp unit.

  The rear SAM control module (N10/8) actuates

• the outer tail and parking lamps (E3e2 and E4e2) in the left and right-hand tail lamps,

  and

• the left and right-hand license plate lamps (E19/1 and E19/2).

Emergency light actuation in event of databus or right front SAM control module (N10/7) malfunction 

When the ignition is switched on (terminal 15) the left front SAM control module (N10/6) actuates the

• standing and parking lamp (E1e3) in the left-hand lamp unit,

  and

• and low beam (E2e2) in the right-hand lamp unit.

  The rear SAM control module (N10/8) actuates

• the outer tail and parking lamps (E3e2 and E4e2) in the left and right-hand tail lamps,

  and

• the left and right-hand license plate lamps (E19/1 and E19/2).

Emergency light actuation in event of processor malfunction in rear SAM control module (N10/8) 

When the ignition is switched on (terminal 15) an emergency function in the rear SAM control module switches on the

• outer tail and parking lamps (E3e2 and E4e2) in the left and right-hand tail lamps,

  and

• and left and right-hand license plate lamps (E19/1 and E19/2).

Emergency light actuation in event of processor malfunction in trailer recognition control module (N28/1) 

When the ignition is switched on (terminal 15) an emergency function in the trailer recognition control module switches the supply for the trailer's tail lamps to the trailer hitch socket, 13-pin (X58).

	Left signal acquisition and actuation module, position/task/design/function		GF54.21-P-4101S
	Right signal acquisition and actuation module, position/task/design/function		GF54.21-P-4102S
	Rear signal acquisition and actuation module, position/task/design/function		GF54.21-P-4103S
	Trailer recognition control module, position/task	Model 215	GF82.10-P-2106M
		Model 220	GF82.10-P-2106S