Panic alarm for private vehicles, function - GF82.25-P-0007S
MODEL 220 only with panic alarm
The panic alarm for private vehicles (SA) is a protective device for the driver and other passengers. It can only be triggered in one stage via the emergency alarm activation switch (S62/6) (installation location according to customer request).
All functions of the private vehicle panic alarm are monitored and controlled by the special vehicle multifunction control module (SVMCM) (N26/9) .
The following functions are supported:
- the fanfare horns (H2) sound intermittently
- high beams (E1e1, E2e1) flash
- roof symbol (if present) flashes
- all turn signals flash
- front dome lamp (N70e1) and left and right rear dome lamps (E15/10, E15/11) are switched on
- on vehicles with TELE AID emergency alarm system (D2B) (code 347) a radio emergency call is triggered
- the central locking system locks
National versions are available for ECE and Switzerland.
Additional options on vehicles equipped with panic alarm:
- Control module outlet for two-way radio
- Control module outlet for taximeter
- Control module outlet for socket
| Interior lighting (IL), function | GF82.20-P-0002S | ||
| Turn signals/hazard warning flashers, function | GF82.25-P-0002A | ||
| Exterior lighting, function | GF82.10-P-0003A | ||
| TELE AID, function | with CODE (347) TELE AID emergency call system (D2B) | GF82.95-P-0001A | |
| Central locking (CL), function | GF80.20-P-0005S | ||
| Special vehicle multifunction control module (SVMCM), location/purpose/design/function | GF82.25-P-4102S | ||
| Transmitter for remote actuation of emergency alarm, purpose | GF82.25-P-4105S |