Remove/install center high-mounted stop lamp - AR82.10-P-5375M

MODEL 220 

Fig 1: Identifying Center High-Mounted Stop Lamp Remove/Install Components

	Remove, Install
1	Use a plastic wedge to lever out cover (2) on rear shelf (1)	Pay attention to cleanliness
1			Fig 2
2	Detach connector for center high-mounted stop lamp (X20/1)
3	Push out center high-mounted stop lamp (E21) from covering (2) in direction of arrow
4	Install in the reverse order
5	Perform function check

Fig 2: Identifying Assembly Wedge(110 589 03 59 00)