Press the radius rod out of the stub axle assembly - AR33.15-P-0160-01MB
| Number | Designation | Model 220 with Code Z07 | Model 220.875/ 878 | |
|---|---|---|---|---|
| BA33.20-P-1006-01F | Self-locking nut, radius rod to steering knuckle | Nm | 140 | 140 |
- Unscrew self-locking nut (18b) from torque strut joint.
- Screw thrust piece onto torque strut joint
- Insert puller.
- Insert press and press torque strut (18) out of the steering knuckle by turning the spindle (1).
Do not damage the rubber boot on the radius rod joint when pressing out.