Remove/install fire extinguishing system warning buzzer - AR86.10-P-0113MB

MODEL 220.1 /8 with CODE (Z04) Light armoring with CODE (Z07) Top protection with fire extinguishing system 

Fig 1: Identifying Fire Extinguishing System Warning Buzzer Remove/Install Components

	Remove/Install
1	Ignition Off, detach transmitter key from the electronic ignition switch control unit
2	Remove fuses no. 54 and no. 58 from rear fuse and relay module	The rear fuse and relay module is located below the right rear seat See ↓
		Fuse assignment of rear fuse and relay box	GF54.15-P-1256-01MB
3	Remove cover (2) on gearshift lever		AR68.20-P-2310M
4	Disconnect electrical connector (1).
5	Remove fire extinguishing system warning buzzer (H13)
6	Install in the reverse order
7	Perform self-test for fire extinguishing system		AR86.10-P-0101-01MB