Removing and installing paneling on A-pillar - AR68.30-P-4050M
MODEL 215, 220
Illustrated on model 220
| Removal, installation | |||
| 1.1 | Remove protective edging in area of A-pillar paneling (1) | ||
| 2 | Unclip cover (5) | ||
| 3 | Unscrew nut (6) | ||
| 4 | Press paneling (1) out of retaining clips (3) (4 pcs.) using assembly wedge | Figure | |
| 5 | Pull paneling (1) up out of guide (4) and retaining lugs of dashboard | ||
| 6 | Install in reverse order |