Removing and installing front floor covering (right) - AR68.20-P-2070M

MODEL 215, 220 

Illustrated on model 220 

Fig 1: Identifying Front Floor Covering Right Side Remove/Install Components - Model 215,220

	Removal, installation
1.1	Remove front seat	Model 220	AR91.10-P-1000M
1.2	Move front seat back as far as possible	Model 215
2	Remove cover below instrument panel (left)	Model 220	AR68.10-P-1500M
		Model 215	AR68.10-P-1500N
3	Pull off door sill molding (2)	Door sill molding fastened with 3 clips
4	Pull off edge guard (1) in lower area on A-pillar
5	Remove panel (4)	Fastened with 2 clips in addition
6	Lift floor covering (8) at rear, remove at center console and then remove towards rear	Installation:  Insert floor covering (8) in area of center console (arrows)
7	Install in opposite order