Setting camber or castor - AR40.20-P-0322-06GH
| Number | Designation | Model 163 | |
|---|---|---|---|
| BA33.20-P-1006-01D | Bolt, upper wishbone to frame | Nm | 120 |
- Loosen both bolts (6f) on upper wishbone (6).
- Push suitable assembly lever (arrow) between the wishbone mount and vehicle frame.
- Adjust camber and caster at front or rear axle by moving the upper wishbone to and fro.
- Tighten bolts (6f) on upper wishbone (6).
Illustrated on rear axle