Remove/install front seat cushion covering - AR91.18-P-1800GH

MODEL 163.113 /128 /136 /154 /157 /172 /174 /175 

Fig 1: Identifying Front Seat Cushion Covering Components

	Remove/install
1	Remove front seat backrest		AR91.10-P-1060GH
2	Pull insert rails of front seat cover (1) off front seat frame (3)	Relieve the load on the front seat cover by pressing down the front seat frame.
3	Press the plug-in clips (7) of the front seat cover (1) out of the front seat frame (3)
4	Pull off the Velcro closure (8) from the front seat cover (1) up to the crosswise stapling (10) of the front seat cushion (2)
5	Bend open the wire rings (9) of the crosswise stapling (10)
6	Unhook wire for the crosswise stapling (10) on front seat cover (1) from opened wire rings (9)
7	Pull remaining Velcro closure (8) off the front seat cushion (2)
8	Remove front seat cover (1) from front seat cushion (2)
9	Install in the reverse order