Fuel pressures and inner leak tightness, ME-SFI - Testing hydraulic system - AD07.61-P-7000A

ENGINES 112.910, 

112.911 up to 31.5.00, 

112.920, 

112.921 up to 31.5.00, 

112.923, 

112.940 /941 /942 up to 31.5.00, 

112.943 

	Hazard  from contact with parts conducting high voltages.	Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart pacemakers) must not carry out work on the ignition system.	AS15.10-Z-0001-01A
	Lethal hazard  from being drawn into rotating vehicle parts	Do not reach into rotating parts. Wear closed and close-fitting work clothes. Secure area of rotating vehicle components against unauthorized access.	AS00.00-Z-0004-01A
	Risk of explosion  from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury  to eyes and skin from contact with fuel.	No fire, sparks, naked flames or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
	Connection and use of testing equipment		AD00.00-P-1000AZ
	Gasoline injection and ignition system (ME-SFI) - diagnosis - previous knowledge		AD07.61-P-2000A
a	Connect pressure measuring unit at test connection.
b	After the end of the test, reduce fuel pressure via measuring cup (055) and allow remaining fuel to flow out.		AD07.61-P-2100-02B
	Checking
1	Fuel pressure - Testing hydraulic system, fuel pressures and inner leak tightness, ME-SFI		AD07.61-P-7000-01A
2	Inner leak tightness - Testing hydraulic system, fuel pressures and inner leak tightness, ME-SFI		AD07.61-P-7000-02A