Fault code description - ME-SFI - pressure sensor - AD07.61-P-4000-02A
| 1 | Fault code | P0I05 |
| 2 | Fault storage Activation of malfunction indicator lamp for engine diagnosis (EURO3/4) or CHECK ENGINE (MIL) |
after the end of the test period and faults after two successive driving cycles with faults |
| 3 | Frequency of the test | continuous |
| 4 | Checked signal or status | Limits for pressure sensor signal (intake manifold absolute pressure) |
| 5 | Fault setting conditions Lower limit Upper limit Order of magnitude for lower limit Test duration |
approx. 0 mbar, if throttle valve angle is greater than 80° approx. 500 -1200 mbar, map dependent on engine speed and throttle valve angle at least -60 mbar, if engine speed > 1300 rpm approx. 5 s for each limit |
| 6 | Test prerequisites |
|