Fault code description - ME-SFI - idle speed control - AD07.61-P-4000-24A
| 1 | Fault code | P0507 |
| 2 | Fault storage | after the end of the test period and faults |
| Activation of malfunction indicator lamp for engine diagnosis (EURO3/4) or CHECK ENGINE (MIL) |
after two successive driving cycles with faults | |
| 3 | Frequency of the test | continuous |
| 4 | Checked signal or status | Engine speed |
| 5 | Fault setting conditions | Specified value +200 rpm |
| Upper limit | Specified value -100 rpm | |
| Lower limit | approx. 30 s | |
| Test duration | If the activation of the actuator motor in the throttle valve actuator is modified by the ME-SFI control module, the new specified value must be reached within approx. 25 seconds. | |
| 6 | Test prerequisites |
|