Fault code description - ME-SFI - camshaft Hall sensor - AD07.61-P-4000-14A
| 1 | Fault code | P0341 | |
| 2 | Fault storage | after the end of the test period and faults | |
| Activation of malfunction indicator lamp for engine diagnosis (EURO3/4) or CHECK ENGINE (MIL) |
after two successive driving cycles with faults | ||
| 3 | Frequency of the test | continuous | |
| 4 | Checked signal or status | Camshaft Hall sensor signal | |
| 5 | Fault setting conditions | within 2 engine rotations the signal must change from 0 to 1 and from 1 to 0 | |
| Plausibility | No signal Number |
max. 1 signal change per engine rotation | |
| 6 | Test prerequisites |
|
|
| 7 | If the signal from the camshaft Hall sensor is not available or if false synchronization is detected, fuel cut-off is implemented to prevent damage to the TWC. | ||