Remove/install rear roof frame paneling - AR68.30-P-4470GH

MODEL 163.113 /128 /136 /154 /157 /172 /174 /175 

Fig 1: Identifying Rear Roof Frame Paneling Components

	Remove, Install
1.1	Remove belt end fitting at bottom of 3rd seat row(1)	Only with 3rd seat row, code 847.
			*BA91.40-P-1001-01D
2	Unclip center roof frame covering (2)	Installation:  Install paneling in door rubber seal.
		Long wedge	Figure
3.1	Remove expanding anchor (4) from side roof frame covering (3)	up to 31.08.01 Installation:  Replace expanding anchor.
3.2	Remove screw (5) from side roof frame paneling (3)
4.1	Unclip side roof frame paneling in upper outer corner	As of 01.09.01
4.2	Remove side roof frame paneling (3) upward	Only on 3rd seat row, code 847: remove seatbelt and remove paneling Installation:  Install paneling in door rubber seal.
5.1	Disconnect connector from loudspeaker	As of 01.09.01 and with sound system, code 810.
6	Install in the reverse order

Seat belts/belt tensioners

Number	Designation		Model 163 up to 08/99	Model 163 as of 09/99
BA91.40-P-1001-01D	Screw on belt end fitting	Nm	35	35

Fig 2: Identifying Assembly Wedge (115 589 03 59 00)