Compatibility check for garage door opener - AD68.05-P-2000-02A

Program compatibility tester

Connect compatibility tester to cigar lighter.
Switch on circuit 15R or circuit 15.
Press one of the transmit buttons for longer than 20 s.
The compatibility changes over to the learning mode indicated by the LED flashing.
Hold the hand transmitter for the appropriate system against the interior rearview mirror and operate.
When the learning procedure is completed the LED flashes rapidly.

It is possible to program three different transmitter frequencies. A transmitter frequency is assigned to each transmit button.

Open or close garage door

Press corresponding button. The signal learned for this memory location is transmitted.
The signal from the compatibility tester has a range of at least 85% of the range of the garage door remote control, however at least 15 m.

If the garage door can be opened or closed, the garage door opener is compatible with the garage door.

Delete compatibility tester

Press the two outer transmit buttons for longer than 20 s. After approx. 10 s, the LED flashes rapidly to indicate that all memory locations have been erased.
Before returning the compatibility tester, ensure that the programming is deleted!