RFL replacement or additional remote control key - AD80.35-P-2001-01GH

If an additional transmitter key is required for the vehicle or if a lost key is to be replaced, this is to be programmed by the All-Activity Module (AAM) (N10)  . The new transmitter key is programmed using the HHT menu. Access  to the menu is as follows:

Body - AAM adaptations - transmitter key/transponder. The new transmitter key can only be used after programming.

The lost key must be disabled  when a key reported as lost is replaced.

Which keys are currently disabled can be established with the "Drive authorization" actual values.