Tripping of anti-theft alarm (ATA), function - GF80.50-P-2004GH
MODEL 163 with CODE (551a) Anti-theft alarm (ATA)
The anti-theft alarm (ATA) can be triggered by
- Actuation of an exterior surface contact on vehicles with anti-towing sensor (AS) and interior protection system also by:
- Interior protection system
- Anti-towing sensor (AS).
This assumes that the inputs in question are armed by activation of the ATA .
The armed inputs are checked by the all-activity module (AAM) (N10) . If the same input is not in the non-actuated state during two checks in sequence, the AAM triggers the acoustic as well as visual alarm .
An alarm can be triggered from one input a maximum of three times in sequence.
Moreover the alarm can be triggered with the panic switch on the remote control key .
The operating sequence for the acoustic panic alarm differs from that of the ATA alarm!
| Activating anti-theft alarm (ATA), function | GF80.50-P-2002GH | ||
| Triggering alarm by contact with exterior surface | GF80.50-P-3015GH | ||
| Interior protection system, function | GF80.50-P-2006GH | ||
| Anti-towing sensor (ATS), function | GF80.50-P-2007GH | ||
| Triggering alarm with panic switch | GF80.50-P-3014GH | ||
| Acoustic alarm, function | GF80.50-P-4005GH | ||
| Visual alarm, function | GF80.50-P-4006GH | ||
| All-activity module (AAM) | GF54.21-P-4100GH |