Remove/install side wall taillamp - AR82.10-P-4920GH

MODEL 163 

Fig 1: Identifying Side Wall Taillamp

	Remove/Install
1	Open rear flap
2	Unscrew nuts(1)
3	Pull back left taillamp (E3) or right taillamp (E4)	Installation:  Insert spigot (2) in the support (3).
4	Unplug connector (4)
5	Take out taillamp
6.1	Install auxiliary wiring harness	Only if the taillamp is replaced. Only on USA version vehicles, code 494a and as of VIN A289565 up to A371934.	AR82.10-P-4920-01GH
7	Install in the reverse order
8	Perform function check