Removing and installing mirror glass - AR88.70-P-9020GH

MODEL 163.113 /136 /154 /172 /174 up to 31.8.01 

Fig 1: Identifying Mirror Glass & Components

	Remove/install
1	Tilt mirror glass (1) at top outward	Actuate electrical mirror adjustment switch
2	Press mirror glass (1) off of drive		Figure
3	Disconnect connector (3) from mirror heater (M21/1r1 and M21/2r1)
4	Remove mirror glass (1)	Installation:  Install mirror glass (1)from bottom to top, thereby observe support spring (2) and mirror glass mounts (arrows).
5	Install in the reverse order

Fig 2: Identifying Assembly Wedge (110 589 03 59 00)