Testing quiescent current - AR54.10-P-1030-03AB

Fig 1: Identifying Electrical Connection Set (201 589 00 99 00)

Commercially available tools

Number	Designation
WH58.30-Z-1001-09A	Multimeter

Test step	Tester/test connection	Operation/requirement	Specification
		Observe multimeter limit for current tests. When the central locking system operates, a current of approx. 20 A flows.
1	G1 W10/W16/4	Lock vehicle. Wait approx. 4 minutes (after-run time for electronic components) Model 163: If engine temperature is < 100°C, wait for approx. 5 minutes; if engine temp. is>100°C, wait approx. 10 minutes.	Displayed value ≥ 0.05 A, or ≥ 0.085 A  (vehicles with immobilizer) Specified value reached: Carry out test step 2.
			Do not activate any other consumers during the test. If other consumers are activated, wait another 4 minutes (after-run time).
2	G1 W10/W16/4	Unlock vehicle. Wait approx. 4 minutes (after-run time for electronic components) Model 163: If engine temperature is < 100°C, wait for approx. 5 minutes; if engine temp. is>100°C, wait approx. 10 minutes.	Displayed value ≥ 0.05 A, or ≥ 0.085 A  (vehicles with immobilizer) Specified value reached: End of test
			Do not activate any other consumers during the test. If other consumers are activated, wait another 4 minutes (after-run time).