Removing and installing wiper arm - AR82.30-P-6100GH

MODEL 163.113 /128 /136 /154 /157 /172 /174 /175 

Fig 1: Identifying Wiper Arm Components

	Remove/install
	Injury hazard  by trapping or crushing, in extreme cases with loss of limbs when reaching into windshield wiper mechanism	Always remove ignition key when working on windshield wiper mechanism.	AS82.30-Z-0001-01A
1	Ensure that wiper motor is in park position
2	Open protective cap (1)
3	Unscrew nut (2)		*BA82.30-P-1002-01C
4	Takeoff wiper arm	Hold wiper arm on mounting section to avoid hitting against windshield.
5	Install in the reverse order

Windshield wipers

Number	Designation		Model Series 163
BA82.30-P-1002-01C	Nut for wiper arm on windshield	Nm	18