Removing, installing seat bench - AR91.12-P-1010GH

MODEL 163.136 /154 /172 up to 8/31/99 1/3 seat bench

Fig 1: Identifying Seat Bench Components

G04609340

	Removing, installing
1	Remove head restraints	See Owner's Manual.
2	Remove cover (3) on 1/3 seat bench
3	Remove screws (1) at front of rear seat mount	Installation: Replace screws fitted with Loctite®.
		Torx bit set	Figure
			*BA91.12-P-1001-03A
4	Fold backrest forward	See Owner's Manual.
5	Fold seat bench to floor	See Owner's Manual.
6	Remove screws (2) at rear of rear seat mount	Installation: Replace screws provided with Loctite®.
		Torx bit set	Figure
			*BA91.12-P-1001-03A
7	Remove 1/3 seat bench
8	Install in reverse order

TORQUE SPECIFICATION

Rear seats

Number	Designation		Model 163 up to 08/99
BA91.12-P-1001-03A	Screw, rear seat console to vehicle floor	Nm	35

Fig 2: Identifying Torx Bit Set (000 589 01 10 00)

G04609341