Remove/install mechanical stop lamp switch - AR42.10-P-0040GH

MODEL 163.113 /128 /136 /154 /157 /172 /174 /175 

Fig 1: Identifying Mechanical Stop Lamp Switch Components

	Remove/Install
1	Remove cover below instrument panel		AR68.10-P-1500GH
2	Unplug electrical connector at stop lamp switch (S9)
3	Press locking device (2)
4	Turn and pull out stop lamp switch (S9)	Installation:  Pull actuating pin (1)all the way out. Push through brake pedal (24), insert stop lamp switch (S9) and turn until locking device (2) engages. The actuating path is adjusted automatically.
5	Install in the reverse order.