Brake testing on test stand - AP42.00-P-4290GH

MODEL 163 

Modification notes

19.1.04

Step "Check free travel of service brake pedal" removed.

1	Depress parking brake 10 notches  on pedal systems with friction brakes	Insufficient braking effect: ↓
		Adjust parking brake.	AR42.20-P-0540GH
2	Measure deceleration values of parking brake on test stand.	Permissible deviation from larger value: maximum 50 % Braking effect of parking brake uneven or insufficient: ↓
		Bed in parking brake according to instructions.	AP42.20-P-4290-01GH
3	Measure deceleration values of service brake on test stand.	Permissible deviation from larger value: maximum 25 %
4	Check indicator lamps	If one of the ABS, BAS, ESP or SBC indicator lamps comes on after the brake test stand run when the engine is running:↓
		Read fault memory and erase.	AD00.00-P-2003A
		The indicator lamp may light up when brake test stands are run at > 5 km/h, caused by an implausible speed signal from the different rotational speeds at the front and rear axles.