Making cutout for ski bag housing - AN91.22-P-0001-01A

Workshop equipment

WE58.40-Z-1010-03A

Compressed air high-performance keyhole saw

Make cutout (1) at the partition panel (2).
Cut out opening (1) with compressed air high performance keyhole saw.

Fig 1: Identifying Cutout Partition Panel And Keyhole
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fold cutting edge all round to the rear, deburr and paint.
Remove metal swarf.

Fig 2: Identifying Cutting Edge Round To Rear, Deburr And Paint
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.