General information on chassis alignment check - AR40.20-P-0201FB
MODEL 210 with CODE (979) Special protected version with CODE (Z04) Light armor plating with CODE (Z06) B6 armor plating
| Inspecting | |||
| Condition of vehicle | Chassis alignment should be checked and adjusted in the condition of the vehicle in which it is most frequently used (ready for the road). |
||
| Use test sheet for chassis alignment | Order no. B20.800.98.230.00.B-00/0291 Continuous paper order no. B20.800.98.230.10.B-00/0491 |
||
| 1 | Condition of tires | Visual inspection for wear, tread depth, damage | |
| 2 | Condition of wheels | Visual inspection for damage | |
| 3 | Tire inflation pressure | Refer to Owner's Manual or information plate on inside of fuel filler flap for tire inflation pressure; adjust to correct pressure if necessary. | |
| 4 | Underside of vehicle | Visual inspection for damage, corrosion on chassis and load-bearing body parts, leaks at components and lines. | |
| 5 | Inspect wheel bearing play | ||
| 6 | Inspect boots, replace | AR46.40-P-0400A |