Test values for rear axle spring strut - BE32.30-P-1000-01A

Models 202, 203, 208, 210

Test values for rear axle spring strut

Number	Designation				Model Series 202 with ride-height control	Model 203.2 with level control system
BE32.30-P-1001-01A	Distance between pressure hose bracket on spring strut tube and wheel house	at full rebound travel	Left	mm	11-15	11...15
			Right	mm	24-28	24...28
			For illustration, see		AR32.30-P-0610-01A	AR32.30-P-0610-01A
BE32.30-P-1002-01A	Distance between pressure hose bracket on spring strut tube and wheel house	ready to drive (vehicle must be on its wheels)	Left	mm	14-18	14...18
			Right	mm	26-30	26...30
			For illustration, see		AR32.30-P-0610-01A	AR32.30-P-0610-01A

Test values for rear axle spring strut

Number	Designation				Model 208 with level control system	Model 210.0 with level control system / ADS
BE32.30-P-1001-01A	Distance between pressure hose bracket on spring strut tube and wheel house	at full rebound travel	Left	mm	11-15	8.5-10.5
			Right	mm	24-28	8.5-10.5
			For illustration, see		AR32.30-P-0610-01A	AR32.30-P-0610-01A
BE32.30-P-1002-01A	Distance between pressure hose bracket on spring strut tube and wheel house	ready to drive (vehicle must be on its wheels)	Left	mm	14-18	10.5-12.5
			Right	mm	26-30	10.5-12.5
			For illustration, see		AR32.30-P-0610-01A	AR32.30-P-0610-01A