LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2001 >> E430 Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Axle - 210 Chassis >> Testing & Repair >> Driving out and pressing on outer joint - AR33.30-P-0660-02A

Driving out and pressing on outer joint - AR33.30-P-0660-02A

    Driving out 

  1. Drive out outer joint ring (60l) using 27 mm open-end wrench.

    First version illustrated 

    Fig 1: Driving Out And Pressing On Outer Joint
    G04632534Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

    2. Pressing on 

  2. Check circlip (60f) and replace if necessary.
  3. Push disk spring (60g) and intermediate ring (60h) onto front axle shaft.
  4. Press on outer joint ring (60l), the circlip (60f) must lock in position in the joint hub.

    First version illustrated 

    Fig 2: Identifying Circlip, Disk Spring And Outer Joint
    G04632535Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals