Cutting out side window with cutting blade; Risk of injury from knife slipping off when clamping it in the multicutter and from glass splinters when cutting out bonded windows - AR67.30-P-4050-01F

Clamp/unclamp blade only with air supply shut off. Wear protective gloves and goggles 

Fig 1: Identifying Cutting Blade (124 589 02 63 00)

1. Clamp blade (124 589 02 63 00) into multi-cutter.
2. Moisten whetstone and sharpen blade on both sides with machine switched on.
3. Cut out side window (1) from outside.
   Fig 2: Identifying Side Window