Retrofitting additional receiver - AN80.30-P-0001-02A

1. Break cover for bulb opening out of rear lamp
2. Stick additional receiver of the infrared remote control (A26/9) into rear lamp

   Use only adhesives which do not contain solvents (e.g. adhesive sealing compound)

Shown on model 210.0 

Fig 1: Identifying Infrared Remote Control

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Make a rectangular cutout (27_38 mm) in the middle part of the tailgate trim panel (model 210.2: middle part of rear roof frame).
2. Insert additional receiver of infrared remote control (A26/9) (use self-adhesive felt strips if necessary).

   Shown on model 202.078 

   Fig 2: Infrared Remote Control Dimension

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.