Retrofitting washer fluid reservoir and washer fluid hose - AN82.15-P-0001-03A
- Assemble washer water hose.
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
- Remove grommet and windshield washer pump (M5/1) as well as water level switch and cover from old washer reservoir and install in new washer reservoir (1).
- Install grommet and headlamp washer pump (M5/2) in washer reservoir (1).
- Install washer reservoir (1) in vehicle.
- Attach washer water hose (4) to headlamp washer pump (M5/2).
- Connect auxiliary reservoir (2) and washer water reservoir (1) with hose (3).
- Slide auxiliary reservoir (2) into washer water reservoir (1).
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
- Clip washer water hose into mounting clamps (arrows) present on washer water heater line.
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.