Signal devices fanfare horns diagnosis, advanced information - AD54.35-P-2000A

MODEL 202 as of 1.6.97, 208, 210.081 /281, 210 as of 1.3.97 

	In order to avoid damage to control modules, couplings to control modules must only be disconnected or connected with ignition switched off. If a contact is bridged during a test, fuse-protected cables are to be used.
	Fanfare horns function description contents index	Model 202 as of 1.6.97 Model 208 up to 31.7.99 Model 210 up to 30.6.99	GF54.35-P-0999ZZ
	Fanfare horns function description contents index	Model 208 as of 1.8.99 Model 210 as of 1.7.99	GF54.35-P-0999AZ
	Fanfare horns location of components	Model 202 as of 1.6.97 Model 208 up to 31.7.99 Model 210 up to 30.6.99	GF54.35-P-0001-01A
	Fanfare horns network of components	Model 202 as of 1.6.97 Model 208 up to 31.7.99 Model 210 up to 30.6.99	GF54.35-P-0001-02A
	Fanfare horns network of components	Model 208 as of 1.8.99 Model 210 as of 1.7.99	GF54.35-P-0001-02B
	Overview of electric wiring diagrams for electrical system, equipment and instruments	Model 208	PE54.00-P-1100D
	Overview of electric wiring diagrams for electrical system, equipment and instruments	Model 210	PE54.00-P-1100A
	Connection and use of test equipment		AD00.00-P-1000AZ
	Key to diagnosis symbols		AD00.00-P-2001A
	Diagnosis assignment		AD00.00-P-2002A
	Connection of diagnosis test equipment		AD00.00-P-2003A
	Diagnostic tools, signal devices fanfare horns		AD54.35-P-2000-01A
	Notes on HHT, previous knowledge signal devices fanfare horns diagnosis	Model 202 as of 1.6.97 Model 208 up to 31.7.99 Model 210 up to 30.6.99	AD54.35-P-2000-02A
	Notes on HHT, previous knowledge signal devices fanfare horns diagnosis	Model 208 as of 1.8.99 Model 210 as of 1.7.99	AD54.35-P-2000-02B
	Connection assignment, previous knowledge signal devices fanfare horns diagnosis		AD54.35-P-2000-03A
	Battery voltage 11-14V
	Fuses in order
	Systems in order