LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2001 >> E430 Base >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Backup Assist & Vehicle Log - Retrofitting & Conversion - 210 Chassis >> Retrofitting & Conversion >> Installing control module - AZ54.65-P-0001-04FA

Installing control module - AZ54.65-P-0001-04FA

    Model 210.2 as of 1.7.99 model year 99 

  1. Position control module (1) in the upper area of the side panel bracing in the left of the trunk and mark the second fixing hole for the control module on the front side of the brace as shown in the figure.
  2. Drill out marked drilling point to 6.5 mm dia.

    IMPORTANT Prime the drilled holes.

  3. Position the control module behind the side panel bracing and screw on with 2 self-tapping screws (20) and 2 spring nuts (22).
    Fig 1: Identifying Control Module
    G04633531Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals