LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2001 >> CLK55 >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle -- 208 Chassis >> Testing & Repair >> Removing and installing front and rear rubber bushings in rear axle mount - AR35.10-P-0040D >> Removing and installing rear axle suspension rubber mount - AR35.10-P-0040-03D

Removing and installing rear axle suspension rubber mount - AR35.10-P-0040-03D

Fig 1: Identifying Removal And Installation Tool (202 589 03 43 00)
G04713315
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1002-06A Lubricant A 000 989 01 60

Removing rubber mount 

  1. Using removal tool (01a-01c), press rubber mount (1b) out of rear axle carrier.
    Fig 2: Pressing Rubber Mount Out Of Rear Axle Carrier Using Removal Tool
    G04713316

    2. Installing rubber mount 

  2. Rub rubber mount (1b) with lubricant.
  3. Using installation tool (01c, 01f, 01g), pull in rubber mount (1b).

IMPORTANT

Install lower section of installation tool (01g) on the rubber mount (1b) so that the lugs are not damaged during installation.

Fig 3: Pulling In Rubber Mount Using Installation Tool
G04713317
scientia non olet · About LEMON Manuals