Service card for units - AP00.20-P-0000-08A
Mercedes-Benz
Service card - major assembly
Maintenance
During the first service after exchanging a Mercedes-Benz genuine major assembly the operations listed in the maintenance sheet or maintenance manual are to be carried out and confirmed.
WARNING:
When vehicles without service display are inspected, the assembly will be serviced within the scope of the following care and/or maintenance service.
Running-in:
The first 1 500 km
Run in gently, but briskly.
Avoid high load, high rpm and high speed.
Automatic transmissions: do not use kick-down and do not brake the vehicle by shifting down manually.
After 1 500 km
Gradually bring the vehicle up to its full road and engine speeds.