Remove/install fuel tank - AR47.10-P-4100E

MODEL 202, 208 

Tank system for diesel engine 

Fig 1: Identifying Fuel Tank Remove/Install Components - Tank System For Diesel Engine

Tank system for gasoline engine 

Fig 2: Identifying Fuel Tank Remove/Install Components - Tank System For Gasoline Engine

	Removing, installing
	Risk of explosion  if ignition takes place, risk of poisoning  caused by inhaling fuel vapors or swallowing fuel as well as risk of injury  to skin and eyes exposed to fuel.	No fire, sparks, open flames or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
1	Empty fuel tank fill		AR47.10-P-4001E
		Pay attention to fuel quantity.	*BF47.10-P-1001-01A
2	Removing and installing complete rear axle		AR35.10-P-0010D
3	Remove/install wheel-housing liner in rear wheel-housing	At right rear.
		Model 202	AR88.10-P-1400E
4	Slacken hose clamp (83/1) from connector hose-filler neck at the bottom
5	Pinch off fuel hose (90/12) on the suction side and degassing hose (84/6) with Pierburg fuel pump	Model 202.018, 208
6	Unscrew nut (80/1) of filler neck at bottom
7.1	Unscrew fuel metering pump (Y23)	Model 202.133/193 Model 208.374 (AMG) Right in front of the fuel level sensor.
8	Dismount tensioning straps (80/2)	For this step, support fuel tank with lift.
			*BA47.10-P-1003-01A
	Suspension of fuel tank modified	Model 202, 208	BT47.10-P-0004-01A
9	Loosen sound deadening mat (80/8)	To do so, lower the lift by approx. 30 cm.
	Sound deadening mat omitted, fuel tank modified	Model 202	BT47.10-P-0002-01A
10	Unscrew nuts (80/7) from fuel tank	Fuel tank without rubber naps
			*BA47.10-P-1002-01A
		Fuel tank with rubber naps
			*BA47.10-P-1006-01A
11	Remove fuel strainer	Clean and check for re-usability.
			*BA47.10-P-1005-01A
12	Install in the reverse order
13	Dispose of fuel tank
	Disposing of fuel tanks		OS47.10-P-0001-01A

FUEL TANK

FUEL TANK

FUEL TANK