Remove, install fuel gage sensor - AR47.10-P-7000E

MODEL 202, 208 

Fuel tank system of gasoline engines 

Fig 1: Identifying Fuel Gage Sensor Remove/Install Components - Fuel Tank System Of Gasoline Engines

Fuel tank system of diesel engines 

Fig 2: Identifying Fuel Gage Sensor Remove/Install Components - Fuel Tank System Of Diesel Engines

Fig. item, etc.	Work instructions
	Risk of explosion  if ignition takes place, risk of poisoning  caused by inhaling fuel vapors or swallowing fuel as well as risk of injury  to skin and eyes exposed to fuel.	No fire, sparks, naked flames or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
	Drain fuel tank, fill		AR47.10-P-4001E
	Ring nut	Use pronged wrench for unscrewing, screwing on.	*BA47.10-P-1004-01A
			Fig 3
Y23	Fuel metering pump	Unbolt. Only fitted to models with heater booster or stationary heater.
B4/1	Fuel gage sensor	Installation note  Fit on lines (84/4) of suction spray pump at fuel gage sensor (B4/1). Insert fuel gage sensor with studs into slots of fuel tank. Replace shaped seal (89/2).

FUEL TANK

Fig 3: Identifying Puller (202 589 00 07 00)